Zapdos Labs

What is Zapdos Labs?

Zapdos Labs builds AI video agents for industrial sites. Instead of adding new hardware, it works on top of the security cameras a factory or warehouse already has, watching feeds as they happen and reporting what is off. Use cases include worker safety (worker-vehicle proximity, near-misses and missing protective equipment), checking that operators follow standard procedures in sequence, tracking vehicles and materials to find line losses, and following a person or part across several cameras. Every detection is recorded together with its clip, camera, zone and shift, which builds into a searchable record. Before going live, the team rebuilds the site as a 3D digital twin and tests detections against it to give an accuracy figure up front, and the vendor says deployment takes about 14 days. A small Zapdos box runs inside the site's network so video stays on site and only events leave. Pricing is not published, so contact Zapdos for terms.

Use cases

• Detect forklift and pedestrian near-misses
• Check PPE compliance on camera
• Verify assembly steps follow procedure
• Count parts per tray at a gate
• Track vehicles and materials across a site
• Log incidents with video evidence
• Spot oil on water from existing cameras

Who it's for

• Plant managers
• Safety teams
• Operations leaders
• Warehouse operators

Why use Zapdos Labs

• Works with cameras already installed, so many sites need no new camera purchases.
• Video stays on the site network and only the event leaves, which suits sites with no-upload rules.
• Every flagged event comes with its clip, so incident reports need less manual footage review.
• Testing against a 3D copy of the site gives an accuracy number before live cameras are switched on.
• Repeated events build a record that helps you find the cause of recurring problems.

Zapdos Labs features

• Real-time analysis of existing camera feeds
• Worker safety detection for proximity, near-misses and PPE
• SOP and sequence compliance tracking
• AGV and line efficiency monitoring
• Multi-camera tracking across zones and shifts
• Event log with clip, camera, zone and shift
• 3D digital twin used to test accuracy before go-live
• On-site box so video stays within the network

How to get started with Zapdos Labs

1. Share the site layout and camera list so the team can rebuild the floor as a 3D digital twin.
2. Write detection rules with your safety or operations team and test them on the twin and your own recordings.
3. Install the small Zapdos box on the site network and connect it to the existing cameras.
4. Agents watch the feeds, filter detections and send alerts to the right person.
5. Review the logged events, with clips, to find patterns and fix the underlying cause.

Zapdos Labs limitations

• Pricing is not published
• Deployment involves rules written with the site's safety team
• Some case studies add a camera, such as one over each gate for part counting

Zapdos Labs pricing

We couldn't confirm pricing on the official site. Check zapdoslabs.com for current prices.

Prices can change and may vary by country or exclude tax. Check the official pricing page.

Zapdos Labs alternatives

The main Zapdos Labs alternatives listed on Debuly are InstaVision, Lumana, OpenVector, VOLT, Meshly and Pulses.ai. The table compares pricing and platforms; order is A–Z.

1. 

   InstaVision

   Cloud AI video intelligence that turns IP cameras into security agents with detection, natural language search and automated alerts.

   Automation and agentsDeveloper platforms
   Visit InstaVision (official site)
2. 

   Lumana

   AI video security platform that adds alerts, search and investigation tools to any IP camera.

   Automation and agents
   Contact salesVisit Lumana (official site)
3. 

   Meshly

   Revenue verification platform that matches deals across CRM, billing, ERP and contracts, and validates contracts against your policies.

   Automation and agentsProductivity
   Free trialVisit Meshly (official site)
4. 

   OpenVector

   Camera-based AI that watches your video feeds and turns what it sees into workflows and actions in your business software.

   Automation and agentsDeveloper platforms
   PaidVisit OpenVector (official site)
5. 

   Pulses.ai

   Physical intelligence platform that uses on-device vision hardware and AI operators to track queues, occupancy and compliance in physical spaces.

   Automation and agentsProductivity
   Contact salesVisit Pulses.ai (official site)
6. 

   VOLT

   AI video intelligence for schools and campuses that spots weapons and emergencies on existing cameras, priced per camera.

   Automation and agentsProductivity
   PaidVisit VOLT (official site)

Zapdos Labs FAQ

Sources & verification

Facts on this page come from the official sources below, each with the date we read it. Written by Debuly; the vendor did not review this page.

Image credits

• Logo: from zapdoslabs.com · fetched 24 Oct 2026 · Vendor trademark, used only to identify the product; removed on request
• Cover: none collected yet, so a generated tile is shown.

Spot an error? Report an issue with this listing. We also remove a logo or image on the owner's request.